Jeep #25
- Doolittle
- Completed JP Jeep
- Posts: 25
- Joined: April 29th, 2010, 12:14 am
- Location: Missouri
- Contact:
Re: Jeep #25
I've been away from here awhile. Lost my job so progress stopped completely. But since I've found a new job I've picked things back up. Thanks for the suggestions on the metal dash but my Dad got lucky and found a guy about 100 miles out from where I live who parts out YJs. My dad went with a buddy to get parts for theirs and snagged me a lot of stuff I need. Steering wheel, sun visors, complete dashboard with the metal underpiece, spice colored roll bar padding and new taillights. Also I've got 34 bolts that are stripped and were gonna run me about $5 each, they got those too. All for about $100.
I've got the correct wheels and they're painted, I just need to switch them over and take photos. With this new job and finishing up college I have had absolutely NO time to do anything with my Jeep. We got a lot of snow and I was really bummed I didn't have it ready to go driving with. I'm definitely hoping by mid-January to be nearly completed because after the 5th my schedule has a lot of free time. If anyone knows where I can snag a cheap spice soft top I'd appreciate it, I've been watching ebay and craigslist but jcwhitney has one new for around $400. I also need a bumper (mine is chrome).
With Christmas being yesterday my cousin found this on ebay and got it for me, we all know it's not accurate but I think it's neat.
Thanks to everyone paying attention to my build! I appreciate the feedback.
I've got the correct wheels and they're painted, I just need to switch them over and take photos. With this new job and finishing up college I have had absolutely NO time to do anything with my Jeep. We got a lot of snow and I was really bummed I didn't have it ready to go driving with. I'm definitely hoping by mid-January to be nearly completed because after the 5th my schedule has a lot of free time. If anyone knows where I can snag a cheap spice soft top I'd appreciate it, I've been watching ebay and craigslist but jcwhitney has one new for around $400. I also need a bumper (mine is chrome).
With Christmas being yesterday my cousin found this on ebay and got it for me, we all know it's not accurate but I think it's neat.
Thanks to everyone paying attention to my build! I appreciate the feedback.
Hold onto your butts.
- spike42718
- Posts: 192
- Joined: June 27th, 2010, 3:37 pm
- Location: Campbellsville Ky
- Contact:
Re: Jeep #25
My tan top is a cheap replacement. Its made by pavement ends and is like $200 I think. If you can hold out until march mine will be for sale.
http://www.jeep4x4center.com/soft-tops- ... r=51130-37
http://www.jeep4x4center.com/soft-tops- ... r=51130-37
Go ahead, make fun of my JP jeep. Then all of a sudden a T-rex comes out of nowhere!!!!!!!!............The jeep only sets 4, who's laughing now?
- Doolittle
- Completed JP Jeep
- Posts: 25
- Joined: April 29th, 2010, 12:14 am
- Location: Missouri
- Contact:
Re: Jeep #25
I haven't checked in here in a long time! Back in June I was "finished" with my Jeep (I'm missing a few items like the winch and fog lights) and never posted updated pictures.
http://flic.kr/p/arw26g
http://flic.kr/p/aryDr1
http://flic.kr/p/aryDmb
http://flic.kr/p/arw24n
I've got the soft top, I'm just not putting it back on yet 'cause the weather is still so great. That should happen in the next few weeks though.
http://flic.kr/p/arw26g
http://flic.kr/p/aryDr1
http://flic.kr/p/aryDmb
http://flic.kr/p/arw24n
I've got the soft top, I'm just not putting it back on yet 'cause the weather is still so great. That should happen in the next few weeks though.
Hold onto your butts.
Re: Jeep #25
looks really good wow. Those seats and door pockets look great.
Roads Where were going a Delorean will never go, BUT a JEEP sure will!.
Re: Jeep #25
Awesome, everything looks brand new!
- Doolittle
- Completed JP Jeep
- Posts: 25
- Joined: April 29th, 2010, 12:14 am
- Location: Missouri
- Contact:
Re: Jeep #25
It's amazing what new paint can do.tim8820 wrote:Awesome, everything looks brand new!
Hold onto your butts.
- Jack_Fauth
- Completed JP Jeep
- Posts: 330
- Joined: May 13th, 2010, 12:09 pm
- Location: Lancaster Pa
- Contact:
Re: Jeep #25
can you tell me a little more about the type of material and did he weld these together?...i don't see seam lines or anything. Did he buy the materials local or cut them dowm. These look very good and i would like to use your dad's method to do my guards for my Jabsco lights.Doolittle wrote:[The lights. I bought a set of marine lights that looked similar to the Jabsco ones and my Dad rigged up some guards and brackets out of aluminum. It looks crooked here because of the way I was holding it, I was trying to not scratch the paint. These aren't motorized and are shallower than the Jabsco ones.
Any help would be greatly appreciated
Thanks
Jack
Still selling complete decal/stencil kits in any number
Jeep conversion service http://www.no-limitcustoms.com
95 Sahara- PA Jeep#12-SOLD
000 _oooo_
00/| ,[___],
|--L@/--[]lllll[]-
()_) 0 ()_)-o-)_)
Jeep conversion service http://www.no-limitcustoms.com
95 Sahara- PA Jeep#12-SOLD
000 _oooo_
00/| ,[___],
|--L@/--[]lllll[]-
()_) 0 ()_)-o-)_)
-
- Posts: 64
- Joined: November 22nd, 2009, 12:07 pm
- Contact:
Re: Jeep #25
Great job on your Jeep Doolittle!
- Doolittle
- Completed JP Jeep
- Posts: 25
- Joined: April 29th, 2010, 12:14 am
- Location: Missouri
- Contact:
Re: Jeep #25
I haven't been back to this forum in months again.
Here's a photo of my JP Jeep with the soft top on. This past September it won Best in Class at a car show.
Here's a photo of my JP Jeep with the soft top on. This past September it won Best in Class at a car show.
Hold onto your butts.
Who is online
Users browsing this forum: No registered users and 54 guests