It was "In the making" but now "It's made"
- ratrace427
- Completed JP Jeep
- Posts: 950
- Joined: February 29th, 2012, 4:47 pm
- Location: Tulsa, Ok
- Contact:
It was "In the making" but now "It's made"
I am excited! I have been after this shadow for many years. the setup isn't complete but more pictures soon.
Sent from my SM-G950U using Tapatalk
Sent from my SM-G950U using Tapatalk
I am John Sisemore on Facebook
- ratrace427
- Completed JP Jeep
- Posts: 950
- Joined: February 29th, 2012, 4:47 pm
- Location: Tulsa, Ok
- Contact:
It was "In the making" but now "It's made"
I took three different fog light sets to create a high visual fidelity set with great functionality. I am using a 13 watt non halogen style bulb versus the 55 watt H3 style bulb. I can run the 13 watt ones all the time without breaking laws or blinding the people behind me. I used rubber closeout boots from another KC light set which really cleans up the looks of the mounting. I also put two washers under each mount to bring the base up. with the base mounted higher I can point the fog lights down to help eliminate brightness. I am also using metal reflector housings vs the plastic ones from the KC set. those KC ones are really cheap plus we know now that KC isn't correct anyways. so the search continues for a "Power" brand plastic reflectors. having the Power brand will be worth the switch to the cheap plastic reflector...I am blown away by how cheap they are....
Sent from my SM-G950U using Tapatalk
Sent from my SM-G950U using Tapatalk
I am John Sisemore on Facebook
-
- Posts: 273
- Joined: February 24th, 2010, 12:06 am
- Contact:
Re: It was "In the making" but now "It's made"
That looks really good! I might modify mine now that I think about it
JP25- Jurassic Park Maintenance, 1988 Jeep Comanche
viewtopic.php?f=20&t=2680
viewtopic.php?f=20&t=2680
Re: It was "In the making" but now "It's made"
Nice work. Oddly, my off brand version came in 1 side that has a shield and the other is missing.
Jurassic Park Jeep 10: Completed - Location: Minnesota
https://www.facebook.com/JPMaintenanceJeep/
Remember... a correct font is as important as the correct paint color!
https://www.facebook.com/JPMaintenanceJeep/
Remember... a correct font is as important as the correct paint color!
- ratrace427
- Completed JP Jeep
- Posts: 950
- Joined: February 29th, 2012, 4:47 pm
- Location: Tulsa, Ok
- Contact:
Re: It was "In the making" but now "It's made"
making another one would be easy. The H3 style bulb would just need one without bends but it might make a slight difference in the shadow. only one way to find out but you might have to make two so that the look is the same side to side.JP Junkie wrote:Nice work. Oddly, my off brand version came in 1 side that has a shield and the other is missing.
I am John Sisemore on Facebook
- ratrace427
- Completed JP Jeep
- Posts: 950
- Joined: February 29th, 2012, 4:47 pm
- Location: Tulsa, Ok
- Contact:
It was "In the making" but now "It's made"
some more summer updates. used SEM flex coat Thomas green
Sent from my SM-G950U using Tapatalk
Sent from my SM-G950U using Tapatalk
I am John Sisemore on Facebook
- ratrace427
- Completed JP Jeep
- Posts: 950
- Joined: February 29th, 2012, 4:47 pm
- Location: Tulsa, Ok
- Contact:
It was "In the making" but now "It's made"
factory floor mats were sun faded also. strange how some material fades faster than others
Sent from my SM-G950U using Tapatalk
Sent from my SM-G950U using Tapatalk
I am John Sisemore on Facebook
- ratrace427
- Completed JP Jeep
- Posts: 950
- Joined: February 29th, 2012, 4:47 pm
- Location: Tulsa, Ok
- Contact:
Re: It was "In the making" but now "It's made"
more fog light updates. cleaning up a set of "power" brand. I still have another set with a halogen bulb base. I could swap that base over but then i'm stuck with a H3 bulb that is 55watts.
I am John Sisemore on Facebook
- ratrace427
- Completed JP Jeep
- Posts: 950
- Joined: February 29th, 2012, 4:47 pm
- Location: Tulsa, Ok
- Contact:
Re: It was "In the making" but now "It's made"
It's been years and my panels needed a freshen up
I am John Sisemore on Facebook
Who is online
Users browsing this forum: No registered users and 6 guests