New member, new project... but on a different scale.
Re: New member, new project... but on a different scale.
Update: 3D printed parts have arrived!!
- Attachments
-
- DSC_0578.jpg (110.15 KiB) Viewed 11785 times
-
- DSC_0582.jpg (125.09 KiB) Viewed 11785 times
-
- DSC_0572.jpg (117.93 KiB) Viewed 11785 times
-
- DSC_0553.jpg (135.79 KiB) Viewed 11785 times
-
- DSC_0556.jpg (128.66 KiB) Viewed 11785 times
-
- DSC_0592.jpg (117.96 KiB) Viewed 11785 times
Re: New member, new project... but on a different scale.
I've been busy with other things, but found some time to work the Jeep body. I'm attempting to get the new doors to fit.
-
- Posts: 273
- Joined: February 24th, 2010, 12:06 am
- Contact:
Re: New member, new project... but on a different scale.
I really like this one! Any plans to make the lights work?
JP25- Jurassic Park Maintenance, 1988 Jeep Comanche
viewtopic.php?f=20&t=2680
viewtopic.php?f=20&t=2680
Re: New member, new project... but on a different scale.
I plan on getting as many lights working as possible. But it might be a little too difficult to get the wrangler bumper fogs to work.
Re: New member, new project... but on a different scale.
3D printed winch painted and wrapped in "cable". The chrome wench bars were made from a paperclip smashed on the ends in a vice.
-
- Posts: 8
- Joined: May 10th, 2019, 1:29 am
- Contact:
Re: New member, new project... but on a different scale.
Looks great!!!!! I have one of these models sitting on a shelf, might have to do the same thing but without the 4 lights on top. On the bumper fogs, I made little 'L' shaped brackets from some sheet brass to mount the stock Tamiya fog lamps out where they should be on the JP jeep. The housing is a bit on the large size for the thinner profile fog lamps, but close enough and they are designed to be lighted. Cant wait to see how this all turns out. Will the 3d parts be added to a shop like shapeways for others to purchase? Mike
- ratrace427
- Completed JP Jeep
- Posts: 950
- Joined: February 29th, 2012, 4:47 pm
- Location: Tulsa, Ok
- Contact:
Re: New member, new project... but on a different scale.
making the 3d parts available to purchase is a good idea.. this jeep is going to awesome
I am John Sisemore on Facebook
Who is online
Users browsing this forum: No registered users and 5 guests