East Dock Sign
- fantomas
- Completed JP Jeep
- Posts: 551
- Joined: December 14th, 2011, 1:46 am
- Location: Connecticut
- Contact:
Re: East Dock Sign
I just measured my post, it's 82 inches tall.... Just under 7 feet. No idea how many meters that is... 17? (haha just kidding )
- weapon lxxxi
- Posts: 456
- Joined: October 4th, 2011, 12:29 pm
- Location: South coast UK
- Contact:
Re: East Dock Sign
2.1 meters ha haa (don't worry I work in ft & inch anyway)
- DrewSmith007
- Site Moderator
- Posts: 725
- Joined: February 3rd, 2011, 10:44 pm
- Vehicle Make/Model: 1993 Ford Explorer
- Location: Wichita, KS
- Contact:
Re: East Dock Sign
Here's the shot I used to come up with my earlier guess of 7 feet. I had to redo the scaling because I couldn't find the original file. This time it seems to be more like 8 feet tall, scaled off the 3.5" wide post. It might be hard to see without zooming in, but I think I got the 3.5" pretty close. The post is angled a little bit away, so you're really seeing 2 sides. This shot is from the scene at the bottom of the hill after Nedry wrecks the jeep, right before he starts pulling the cable off the winch.
- Attachments
-
- HeightScale.JPG (24.13 KiB) Viewed 19289 times
- weapon lxxxi
- Posts: 456
- Joined: October 4th, 2011, 12:29 pm
- Location: South coast UK
- Contact:
Re: East Dock Sign
DrewSmith007 wrote:Here's the shot I used to come up with my earlier guess of 7 feet. I had to redo the scaling because I couldn't find the original file. This time it seems to be more like 8 feet tall, scaled off the 3.5" wide post. It might be hard to see without zooming in, but I think I got the 3.5" pretty close. The post is angled a little bit away, so you're really seeing 2 sides. This shot is from the scene at the bottom of the hill after Nedry wrecks the jeep, right before he starts pulling the cable off the winch.
Cool good work, over here we have 3" & 4" posts for fencing tallest you should get is 10ft so you bury 2ft in ground which makes it 8ft (that's going on how to build a fence #landscaper ha haa) so that is probably correct
- fantomas
- Completed JP Jeep
- Posts: 551
- Joined: December 14th, 2011, 1:46 am
- Location: Connecticut
- Contact:
Re: East Dock Sign
If you look closely it actually appears to be two 2x4"s stacked (to make the same dimensions as a 4x4).weapon lxxxi wrote:DrewSmith007 wrote:Here's the shot I used to come up with my earlier guess of 7 feet. I had to redo the scaling because I couldn't find the original file. This time it seems to be more like 8 feet tall, scaled off the 3.5" wide post. It might be hard to see without zooming in, but I think I got the 3.5" pretty close. The post is angled a little bit away, so you're really seeing 2 sides. This shot is from the scene at the bottom of the hill after Nedry wrecks the jeep, right before he starts pulling the cable off the winch.
Cool good work, over here we have 3" & 4" posts for fencing tallest you should get is 10ft so you bury 2ft in ground which makes it 8ft (that's going on how to build a fence #landscaper ha haa) so that is probably correct
East Dock Sign
Add another to the thread.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Re: East Dock Sign
Does anybody have the image files for the sign? Looking to get them printed on vinyl.
Re: East Dock Sign
I asked a while back with no luck. I think people have lost them over the years or people are cautious with giving them out because other 'members' have tried to turn them into a money making thing.
I ended up using Cyrix's pictures thrown against wood using a projector to get an outline of each piece. There's another thread either here or on RPF where he posted the general dimensions which I used to purchase the wood.
I ended up using Cyrix's pictures thrown against wood using a projector to get an outline of each piece. There's another thread either here or on RPF where he posted the general dimensions which I used to purchase the wood.
-
- Posts: 18
- Joined: July 8th, 2015, 11:22 am
- Location: Cirencester, England
- Contact:
Re: East Dock Sign
Has anyone done a down load for this. It be cool to get a template of the top parts to stick on the wood to use to cut it out. Have tried drawing it and not working out too well.
-
- Completed JP Jeep
- Posts: 61
- Joined: March 9th, 2015, 10:47 am
- Location: Quebec, Canada
- Contact:
Re: East Dock Sign
I'm looking for the sizes of each form:
What I found so far:
EAST DOCK: 5.5'' x 20''
ARROW: 12'' x 12''
BOAT: seems to be 16'' in diameter
ISLAND: rectangle of 26'' High x 18 wide
Do these seems right ?
Thanks !
What I found so far:
EAST DOCK: 5.5'' x 20''
ARROW: 12'' x 12''
BOAT: seems to be 16'' in diameter
ISLAND: rectangle of 26'' High x 18 wide
Do these seems right ?
Thanks !
Who is online
Users browsing this forum: No registered users and 17 guests