Jurassic Park Jeep Forum

G'day,

Thought I'd upload some build pictures from my buzzer project. Trying to track down a quality grab of the correct tone to go with my fence display once i get my other light.
The bits I used for build. A fuel filter for a Mack, a 3.5" stainless exhaust clamp and a length of aluminum angle. The finished bracket, drilled and brushed. Filter sanded back and primed. All coats of red applied. Masking leaving a band of red for the amber line, then painted. Masking tape removed. Several clear coats applied. Clear coats sanded back followed by a polish. Completed buzzer, clamped onto the bracket and shown beside one of the lights for scale.

Looks Great! Would love to see the end result when everything is put together!

aww man, if i'd known you were doing a fence i would have sent you a link.

i was poking around on gumtree and found someone in Brisbane selling fake concrete barriers from an old shop dispay and i reckon they would have made a great bottom section for a fence

awesome job!

Coming along slowly. Hard to find these bits for the right price in Australia. Just need to paint light bodies.

Nice!

Do you have any pics of the completed set up as if you were at a car show? Would love to see the complete end result

Hey mate,
not as of yet, I'm currently working on the big insulator on the other side of the beam to the lights and buzzer.

I have managed to sandblast the black powder coating off the light bodies, then etch prime and re-paint them the correct colour.
had to delicately remove the ID plates and re attach them afterwards.

also got some 12v DC globes for the lights to make my display safe in public, no 240v and can run off the car's cigarette lighter

I'll add more pictures as I achieve more (doing a million things at once).

Wow that is so cool!

Update?