Pennsylvania Jeep #12

[Cyrix9445]

http://www.safety-marine.co.uk/download ... df?did=348


Best I could find, not very detailed. I pretty sure I just moved the common wire for the motors from the switch to the constant.

[Jack_Fauth]

got the brake dust shields on my front wheel this weekend and repainted the set of 4.

I had a machine shop make me my light guards but i still have not figured out a way to attach them...

On a different note we were parked in a local shopping center today and in a span of 5 minutes we had 3 people pull over and take pictures of the Jeep. People really love this thing...

[Jack_Fauth]

ok, i had a few members ask me about my paint codes, here is what i did
I had the paint shop match the paint code JL1 from there paint book. This color in PPG paint only comes in the version of their paint called Concept. This is a line of paint through PPG
this would cost about $450 a gallon mixed in this type of paint
The paint shop took that formula and mixed it in Shop Line paint( also a version of PPG paint) this was way more inexpensive.
I paid $157 for a full gallon of LJ1 in Shop line

I also had them add flatner to give it that low gloss appearence, the % of flattner used i do not know. It really is a matter of how flat you want you jeep to be
Then i had them add the same amount of flattner to the red color, this was paint code 4279 red, also a 1992 jeep color

here is a picture of my two colors in the cans

hope this helps
Jack

[Deadmike]

Hi jack,

Thanks for the paint codes! It's going to help a lot!

[Jack_Fauth]

starting working on the light guards got them made at a machine shop through my work
just need to paint the sand beige on the brackets. It really pulls the color up on the lights.

here is a mock up

now just 3 more brackets to fabricate...


more to come....

[spike42718]

Very nice!!!

[weapon lxxxi]

They look awesome, what are they made of? How much did you pay the guys to make them? V interested when I get my lights.

[durant11]

yes me as well.. Quite interested

[MyAntsRMarching]

I Have access to a laser engraver... this could be awesome.

I actually just had an idea for your glovebox delete pannel. you should try to do a Data plate for it. Until the late run of Cj5s, jeeps came with acid etched Data plates. I

here are some samples I made

[Jack_Fauth]

just got all my light brackets done for a car show this weekend,I did a sign board to sit out in front of the Jeep explaining all that was done to my YJ.
I will post some more pictures after the show on Sunday.