JP28, 94 YJ, Michigan
- marscreature
- Completed JP Jeep
- Posts: 136
- Joined: September 15th, 2015, 3:50 pm
- Location: Michigan
- Contact:
JP28, 94 YJ, Michigan
I had all 4 corners of the frame replaced and a new floor pan for the driver side.
The original tailgate was rusted through so I bought one a used one in much better condition.
Got used fenders that weren't rusted through that I'll put on after I paint them.
new shocks to replace the existing (possibly original shocks)
*Update (March 9, 2016)
Just got someone to make a light bar thanks to the CAD file from eagle5740
Just ordered a set of #28 decals from Jack_Fauth
Last edited by marscreature on March 22nd, 2016, 7:54 am, edited 1 time in total.
1994 Wrangler Sahara - JP28 in Michigan
- marscreature
- Completed JP Jeep
- Posts: 136
- Joined: September 15th, 2015, 3:50 pm
- Location: Michigan
- Contact:
Re: JP28, 94 YJ, Michigan
Got an okay amount of work done this weekend, power went out Sunday evening so I took that as a sign to be done for the day.
My light bar should be ready by the end of this week, hope it turns out alright!
Got all the fender flares off finally.
Fenders and grill are primed, hardtop is off and in storage, hood is off and waiting for sanding/painting.
Sanded the pin-striping off.
Ordered my #28 plate from Celebrity Machines.
My light bar should be ready by the end of this week, hope it turns out alright!
Got all the fender flares off finally.
Fenders and grill are primed, hardtop is off and in storage, hood is off and waiting for sanding/painting.
Sanded the pin-striping off.
Ordered my #28 plate from Celebrity Machines.
- Attachments
-
- got the hardtop off. looks MUCH better!
- image1.JPG (115.66 KiB) Viewed 11418 times
-
- sanded and primed grill
- image3.JPG (133.25 KiB) Viewed 11418 times
-
- Sanded and primed replacement fencers
- image2.JPG (111.1 KiB) Viewed 11418 times
1994 Wrangler Sahara - JP28 in Michigan
- marscreature
- Completed JP Jeep
- Posts: 136
- Joined: September 15th, 2015, 3:50 pm
- Location: Michigan
- Contact:
Re: JP28, 94 YJ, Michigan
Got some paint on (Rustoleum Fossil and Rustoleum Apple Red)
License plate came from Celebrity Machines!
Made 2 mirror tags and got them double laminated (put hole punch reinforcing stickers on one so it wont rip off with the top down)
License plate came from Celebrity Machines!
Made 2 mirror tags and got them double laminated (put hole punch reinforcing stickers on one so it wont rip off with the top down)
Last edited by marscreature on February 14th, 2017, 4:23 pm, edited 2 times in total.
1994 Wrangler Sahara - JP28 in Michigan
- ratrace427
- Completed JP Jeep
- Posts: 950
- Joined: February 29th, 2012, 4:47 pm
- Location: Tulsa, Ok
- Contact:
Re: JP28, 94 YJ, Michigan
It is looking good and you are making great time. how are you doing the paint? color codes?
I am John Sisemore on Facebook
- marscreature
- Completed JP Jeep
- Posts: 136
- Joined: September 15th, 2015, 3:50 pm
- Location: Michigan
- Contact:
Re: JP28, 94 YJ, Michigan
Thanks, glad i'm not the only one that thinks it looks good! I put a lot of time in sanding, painting, resanding and repainting to get rattle can to look really good!
For the main color i'm using Rustoleum Fossil color. From what I found, the correct Sand Beige is Red 167 Green 161 and Blue 125, Fossil is Red 174 Green 167 and Blue 138.
It's the closest color I could find in a can. I know someone else on here used Rustoleum Camo Sand and that is Red 182 Green 175 and Blue 147 but still looked close to the original sand beige.
For the red I'm using Rustoleum Apple Red, which is what a lot of people on here seem to have used (including JP Motorpool via their YouTube of wheel painting).
As for time, I actually got the fenders and tailgate off a month before but didn't want to post till I knew I would start working on it regularly as I have been. Now I'm very limited by the temperature on which days are warm enough to paint, so I do all my sanding and prep work, then on warmer days leave work early and get a couple coats of paint on. Also, I want to finish asap so I can be considered for one of the last 2 vehicle slots for our local Comic-Con this fall.
I'm going to paint the doors, tailgate, and rims last since they are small enough to be brought inside.
*UPDATE: Decals from Jack_Fauth have been shipped!
For the main color i'm using Rustoleum Fossil color. From what I found, the correct Sand Beige is Red 167 Green 161 and Blue 125, Fossil is Red 174 Green 167 and Blue 138.
It's the closest color I could find in a can. I know someone else on here used Rustoleum Camo Sand and that is Red 182 Green 175 and Blue 147 but still looked close to the original sand beige.
For the red I'm using Rustoleum Apple Red, which is what a lot of people on here seem to have used (including JP Motorpool via their YouTube of wheel painting).
As for time, I actually got the fenders and tailgate off a month before but didn't want to post till I knew I would start working on it regularly as I have been. Now I'm very limited by the temperature on which days are warm enough to paint, so I do all my sanding and prep work, then on warmer days leave work early and get a couple coats of paint on. Also, I want to finish asap so I can be considered for one of the last 2 vehicle slots for our local Comic-Con this fall.
I'm going to paint the doors, tailgate, and rims last since they are small enough to be brought inside.
*UPDATE: Decals from Jack_Fauth have been shipped!
1994 Wrangler Sahara - JP28 in Michigan
- marscreature
- Completed JP Jeep
- Posts: 136
- Joined: September 15th, 2015, 3:50 pm
- Location: Michigan
- Contact:
Re: JP28, 94 YJ, Michigan
Painted the tailgate.
Got a couple tires painted.
Bought 3 large easter eggs from target and painted them to be dino/raptor eggs.
Bought a winch plate and 9000 pound winch from Harbor Freight, I was going to buy my amber rear lights there but they were more yellow and not the orange/amber.
Bought the Eagle Eye amber fog lights.
http://www.ebay.com/itm/280571854931
Bought a 10' "WHEN DINOSAURS RULED THE EARTH" banner
http://www.ebay.com/itm/10-Ft-Jurassic- ... SwAYtWKqij
and 4 JP brochures
http://www.ebay.com/itm/Jurassic-Park-T ... SwP~tW5xhz .
Will still keep my eyes out for any KC 46 lights or a Ramsey REP 6000 winch for JP accuracy or cheap KC 57 or Ramsey 9.5e for JW accuracy.
I'm REALLY hoping to finish this week and get the top all set up this weekend!
I'm glad I decided to do this and am continually thrilled about my own JP jeep!
1994 Wrangler Sahara - JP28 in Michigan
- marscreature
- Completed JP Jeep
- Posts: 136
- Joined: September 15th, 2015, 3:50 pm
- Location: Michigan
- Contact:
Re: JP28, 94 YJ, Michigan
Great progress already this week.
Tailgate on, Rear Flares on, Left fender on, all rims painted!
UPDATE_ 03-31-16 added pictures
Tailgate on, Rear Flares on, Left fender on, all rims painted!
UPDATE_ 03-31-16 added pictures
- Attachments
-
- IMG_3815.JPG (123.83 KiB) Viewed 11299 times
-
- IMG_3814.JPG (125.33 KiB) Viewed 11299 times
1994 Wrangler Sahara - JP28 in Michigan
- marscreature
- Completed JP Jeep
- Posts: 136
- Joined: September 15th, 2015, 3:50 pm
- Location: Michigan
- Contact:
Re: JP28, 94 YJ, Michigan
As far as being recognized as a Jurassic Park Jeep, I would have to say it's complete.
Have my 9k pound winch coming tomorrow, still waiting on my amber fog lights, should have my front fog lights and light bar by the end of the month.
Planning on taking it to work tomorrow!
Have my 9k pound winch coming tomorrow, still waiting on my amber fog lights, should have my front fog lights and light bar by the end of the month.
Planning on taking it to work tomorrow!
1994 Wrangler Sahara - JP28 in Michigan
- marscreature
- Completed JP Jeep
- Posts: 136
- Joined: September 15th, 2015, 3:50 pm
- Location: Michigan
- Contact:
Re: JP28, 94 YJ, Michigan
Forgot I still need to paint the mirrors red...
1994 Wrangler Sahara - JP28 in Michigan
Who is online
Users browsing this forum: No registered users and 19 guests