Dave's JP Jeep #29
- Jack_Fauth
- Completed JP Jeep
- Posts: 330
- Joined: May 13th, 2010, 12:09 pm
- Location: Lancaster Pa
- Contact:
Re: Dave's JP Jeep #29
yea but you won't get is personalized
They give those out with assigned numbers i believe
They give those out with assigned numbers i believe
Still selling complete decal/stencil kits in any number
Jeep conversion service http://www.no-limitcustoms.com
95 Sahara- PA Jeep#12-SOLD
000 _oooo_
00/| ,[___],
|--L@/--[]lllll[]-
()_) 0 ()_)-o-)_)
Jeep conversion service http://www.no-limitcustoms.com
95 Sahara- PA Jeep#12-SOLD
000 _oooo_
00/| ,[___],
|--L@/--[]lllll[]-
()_) 0 ()_)-o-)_)
- mydigitalvoid
- Posts: 110
- Joined: June 10th, 2011, 3:10 pm
- Contact:
Re: Dave's JP Jeep #29
Not true, you can get that plate personalized. $87.65 with up to 5 characters.Jack_Fauth wrote:yea but you won't get is personalized
They give those out with assigned numbers i believe
-Dv
- mydigitalvoid
- Posts: 110
- Joined: June 10th, 2011, 3:10 pm
- Contact:
Re: Dave's JP Jeep #29
What amber light is this?Railtech wrote:Got my plate today:
- Railtech
- Completed JP Jeep
- Posts: 389
- Joined: June 6th, 2010, 1:55 pm
- Location: Atlanta, GA
- Contact:
Re: Dave's JP Jeep #29
Its a KC 5x7. Probably a little bit big, but looks pretty good:
http://www.kchilites.com/lights/57-seri ... -fog-black
http://www.kchilites.com/lights/57-seri ... -fog-black
93 YJ Sahara/JP29 WIP
-
- Posts: 64
- Joined: November 22nd, 2009, 12:07 pm
- Contact:
Re: Dave's JP Jeep #29
Nice Jeep! I love the interior of it Hopefully my seats turn out better than they are after I get them shampooed. Keep up the good work.
- Railtech
- Completed JP Jeep
- Posts: 389
- Joined: June 6th, 2010, 1:55 pm
- Location: Atlanta, GA
- Contact:
Re: Dave's JP Jeep #29
Got the rear amberlamps functional today. Next time I go to the junkyard I am going to pull a OEM fog switch off a cherokee to replace the radioshack one.
I did have some SMD H3 bulbs in there, but they were way too dim. You could barely tell they were on. So I installed the 55W H3's that came from KC.
I did have some SMD H3 bulbs in there, but they were way too dim. You could barely tell they were on. So I installed the 55W H3's that came from KC.
93 YJ Sahara/JP29 WIP
Re: Dave's JP Jeep #29
Ok Dave Have a a few Questions for you now that I have my Jeep .
Are you still running stock springs? Any body lift?
What Size tires are you running?
Do you know the Paint codes for your 93 Stock color (I like it Best) and the red you used?
When I get my Jeep 24 done We have to get them together for pictures
Are you still running stock springs? Any body lift?
What Size tires are you running?
Do you know the Paint codes for your 93 Stock color (I like it Best) and the red you used?
When I get my Jeep 24 done We have to get them together for pictures
Roads Where were going a Delorean will never go, BUT a JEEP sure will!.
- Railtech
- Completed JP Jeep
- Posts: 389
- Joined: June 6th, 2010, 1:55 pm
- Location: Atlanta, GA
- Contact:
Re: Dave's JP Jeep #29
Ecto-DMC wrote:Ok Dave Have a a few Questions for you now that I have my Jeep .
Are you still running stock springs? Any body lift?
Stock saggy springs, no body lift. Would love to get some new stockish springs to raise about 1 inch. But I don't want to lift it and make it look like a rollerskate with the small tires.
What Size tires are you running?
30x9.5
Do you know the Paint codes for your 93 Stock color (I like it Best) and the red you used?
The red was actually mixed by my painter to match the rustoleum safety red that I had painted my wheels. You can get at lowes so not sure what red it is exactly. The paint code on mine I am pretty sure is PV1, Champagne light metallic. I have been working in Birmingham for the last couple weeks, so don't have access to the Jeep.
When I get my Jeep 24 done We have to get them together for pictures
93 YJ Sahara/JP29 WIP
Re: Dave's JP Jeep #29
thanks for the info.. Want to meet up before you go home Im in cullman about an hr from Bham
Roads Where were going a Delorean will never go, BUT a JEEP sure will!.
- Railtech
- Completed JP Jeep
- Posts: 389
- Joined: June 6th, 2010, 1:55 pm
- Location: Atlanta, GA
- Contact:
Re: Dave's JP Jeep #29
Had to take 29 under the knife. I have had this rotational noise from 35-55 mph. I thought it was carrier bearings at first. Isolated to the front unit bearings so I swapped those out today. Some of the 19 year old bolts were a bit tough had to get out the flame wrench to warm up those bolts on the axleshafts. Now the only noise I hear at speed are the other jeep noises .
93 YJ Sahara/JP29 WIP
Who is online
Users browsing this forum: No registered users and 29 guests