Jurassic Park Jeep #12

[ncreptile]

lookgs good so far, post pics of herculiner

[d2b4ker1]

AJ,

You shouldn't need to remove your shackles to get the front bumper off. I used a torx and a breaker bar, it was a tight fit but it can be done.

[AJ Quick]

AJ,

You shouldn't need to remove your shackles to get the front bumper off. I used a torx and a breaker bar, it was a tight fit but it can be done.

I would need a 3/8" breaker bar for it to work I think. I have a 3/8" drive Torx 55, so I need to use an adapter to allow it to use my 1/2" breaker. Unfortunately there just isn't enough room. I could probably use my 3/8" rachet and just put a cheater bar on it.

I just got back from Napa. Spent $250 on new brakes all around. Ofcourse I got the good stuff, painted hats and surfaces. I'm such a compulsive shopper.

Too bad its too cold, windy and about to rain. I have so much to do.

Time to clean out the garage.

[AJ Quick]

The rain subsided until about 6PM. I wish I had just gone outside and started to work. I could have in the very least put the drums on the rear axles. Oh well.

Here is the current to do list, with parts stacking up:

-Install Steering Stabalizer
-Install Sway Bar Bracket
-Install Bump Stops
-Install Shocks
-Install Pads / Rotors
-Install Rear Drums
-Install new TC Output Seal
-Change Oil in TC and Transmission
-Repair Rear Frame Rust
-Remove / repaint Front Bumper
-Install Bumper Guards
-Install Foglights on stock brackets (clean / paint brackets).
-Install Rear Foglights and wire in switch.

I should have front fenders, half doors and (now) a windshield frame on the way. I might pick up some paint to start laying down as a protectant. It really needs to stop raining for me to get some of these things done.

[AJ Quick]

Got my Fog light covers from Quadratec. You will find I am having the same issue as I did with 4WheelDrive.com.

Except this is a little different:

quadrasuck.jpg (211.53 KiB) Viewed 29625 times

[cklinejr]

Everyone likes mismatched stuff!

[AJ Quick]

Looks like Quadratec will be sending me the correct cover for free.

Who wants to bet what style they ship me?

TAKING ALL BETS.

I also offer video poker.

[cklinejr]

I do!

oh wait, no I dont.

build a Futuristic Freebie prop with it.

[Boomerjinks]

I've gotten several 2F1 "deals" like that from Quadratec. One was for a side mirror, and the second was for the soft top hardware.

[AJ Quick]

I've gotten several 2F1 "deals" like that from Quadratec. One was for a side mirror, and the second was for the soft top hardware.

So the idea is to order a bunch of stuff. And keep returning it until they screw up?

Then you get free stuff? DEAL.

Do you run factory soft top hardware? or Bestop stuff?