Page 4 of 9

Re: Australian TJ #14

Posted: October 17th, 2014, 2:43 am
by ausjeep
switches remain unwired. i've just moved house so no progress to report other than summer is almost back so i put the doors back together and made a DIY bikini top until i can afford a real one
1975137_10152722152487114_4957695530273734810_n.jpg
1975137_10152722152487114_4957695530273734810_n.jpg (112.35 KiB) Viewed 12343 times

Re: Australian TJ #14

Posted: October 20th, 2014, 5:23 am
by ausjeep
im thinking about painting the cases of my lights LJ1 like you would with jabscos. sound like a good idea?

Re: Australian TJ #14

Posted: October 24th, 2014, 3:17 am
by ausjeep
1743487_10152753077242114_5895427998129468202_n.jpg
1743487_10152753077242114_5895427998129468202_n.jpg (87.23 KiB) Viewed 12323 times
i'd never seen an actual spice top until i opened the box. its a really different colour in person. it also seems very loose but i think i just went to the extreme of "install on a sunny day".

Re: Australian TJ #14

Posted: October 24th, 2014, 4:59 pm
by Digit
Soft top looks good mate. Clears sound bar ok? I see you've redone your red stripes. They're looking a lot better lol.

Re: Australian TJ #14

Posted: October 24th, 2014, 6:06 pm
by ausjeep
Supercheap has a special on Export paint, 5 cans for $10 so i thought i'd give it a shot. the back one still looks rouugh up close from last time but the front ones getting there

Re: Australian TJ #14

Posted: October 29th, 2014, 9:27 pm
by Digit
Finally found an Aussie source for our antennas too mate. Still need to find a supplier for the ball and spring tho.
Codan HF radios make a 2.6m stainless tapered whip which converts to a convenient 102.3".
This guy sells them out of Melbourne on eBay. And there's a few Australian HF radio supply stores online that stock it too. It won't work on a CB obviously, but Im not even going to install a radio. Just have antenna for show.

Re: Australian TJ #14

Posted: October 30th, 2014, 3:42 am
by ausjeep
found this one on ebay which seems to be exactly what everyone else uses:

http://www.ebay.com.au/itm/190874991971 ... 1423.l2649

i still want the option of using it with a radio even though i cant think of where the hell i'd mount one at this stage

Re: Australian TJ #14

Posted: October 30th, 2014, 7:16 pm
by Digit
That's cool, pickup only tho :(

Re: Australian TJ #14

Posted: November 7th, 2014, 7:20 am
by ausjeep
ausjeep wrote: it also seems very loose but i think i just went to the extreme of "install on a sunny day".
my bestop replacement bow set arrived and its goon from loose to insanely tight. its a little better after it sat in the sun on a 40c day, but getting those plastic bits out of the door surrounds still requires a scredriver or a very sore finger. ANYWAY what was easily the most bang for my buck modifaction was done today:
10696345_10152782827727114_170106306403770194_n.jpg
10696345_10152782827727114_170106306403770194_n.jpg (80.82 KiB) Viewed 12291 times
goodbye 18 year old POS tape deck, hello brand new CD player that lets my upgraded speakers unleash their full potential.

it lets me blast the theme so it still sounds loud at 110 k's an hour with the top down. i had an expensive FM transmitter for my ipod and it still couldn't get half as loud as this.

Re: Australian TJ #14

Posted: November 7th, 2014, 4:18 pm
by Digit
You think your cassette deck was cool, check out the state of the art unit in mine! Electronic tuning. No turning the tuning knob for me lol :D

Did you order your bestop stuff online? Also where did you manage to score the Ramsey?