Page 1 of 2
Explorer Build in Australia
Posted: May 20th, 2018, 6:10 pm
by EFFalcon
Having purchased this car a few months ago as an offroader, i thought why not, seeing a JP Explorer out bush would be enough to make me laugh, and seeing as all of the details required to complete it are readily available via the motorpool, i decided to just go for it.
1st Gen's weren't sold in Australia, so there was little chance of using one as a basis, although i have seen 1 for sale here about 6 months ago, i probably should have picked it up!
So i used my 2000 Gen 2 Explorer XL Manual
How it started about 2 years ago
- How it begun
- 01.png (237.25 KiB) Viewed 13090 times
terrible nudge bar, but a basis to work from
- 02.JPG (59.89 KiB) Viewed 13090 times
copped a bit of offroad work, improved the nudge bar, rear bar carrier etc etc
- 03.JPG (79.68 KiB) Viewed 13090 times
Re: Explorer Build in Australia
Posted: May 20th, 2018, 6:20 pm
by EFFalcon
Then came early mid april 2018, time to begin!
Decided i was going to paint the green/yellow as it was the cheapest option, except the bonnet that would be wrapped.
So i had the colours matched to the vinyl i was going to use.
Day 1 - Dissasemble!
- 04.jpg (236.9 KiB) Viewed 13089 times
Day 2 - Sanding!
- 05.jpg (189.05 KiB) Viewed 13089 times
day 3 - Painting!
- 06.jpg (151.35 KiB) Viewed 13089 times
Day 4 - Cleanup!
- 07.jpg (225.32 KiB) Viewed 13089 times
Re: Explorer Build in Australia
Posted: May 20th, 2018, 6:26 pm
by EFFalcon
I decided to Vinyl wrap both the roof and the bonnet, mainly due to the paint being acylic and the top getting the most of the sun, would hopefully make it last better, this car unfortunately lives outside all the time.
wrapping the roof was a terrible experience... but it looks ok in photos haha.
Day 5 - Bonnet wrapped
- 08.jpg (214.04 KiB) Viewed 13089 times
Day 6 - Roof Wrapped
- 09.jpg (180.29 KiB) Viewed 13089 times
Day 7 - Upper Doors & Tailgate Wrapped
- 10.jpg (217.9 KiB) Viewed 13089 times
About here the weather turned bad, so things got a little delayed, but still chipped away at it!
Started laying on the stripes
- 11.jpg (232.22 KiB) Viewed 13089 times
Re: Explorer Build in Australia
Posted: May 20th, 2018, 6:29 pm
by EFFalcon
At this point i still hadnt painted all the bolt on plasics/trimmings so got cracking on that.
Paint Time!
- 20180428_161430.jpg (212.63 KiB) Viewed 13089 times
- 20180428_164633.jpg (188.6 KiB) Viewed 13089 times
More Re-assembly
- 12.jpg (213.03 KiB) Viewed 13089 times
Re: Explorer Build in Australia
Posted: May 20th, 2018, 6:34 pm
by EFFalcon
More assembly and stickers!
Nudge bar back on & Bonnet Logo
- 13.jpg (182.51 KiB) Viewed 13089 times
Little green parts at the top of the doors
- 14.jpg (170.66 KiB) Viewed 13089 times
This was now the start of May, About now i realised i was going to have to wait a little while to get the side stickers done, i should have ordered them earlier!
So i got cracking on making up some taillight guards
- 31936793_10155851395287886_2568131284681359360_n.jpg (113.47 KiB) Viewed 13089 times
- 20180506_194419.jpg (151.3 KiB) Viewed 13089 times
- 20180508_172817.jpg (117.34 KiB) Viewed 13089 times
Re: Explorer Build in Australia
Posted: May 20th, 2018, 6:43 pm
by EFFalcon
fast forward 2 weeks and i got my final stickers!
- 15.jpg (214.55 KiB) Viewed 13089 times
There are of course still some further touches to come, but that brings it up to where it is currently.
and now i can drive it again!
Re: Explorer Build in Australia
Posted: May 29th, 2018, 12:48 am
by EFFalcon
Out and about
- 33423410_838745426314532_1174368578418245632_n.jpg (84.51 KiB) Viewed 13047 times
Have painted the wheels since, need to get some more photos!
Re: Explorer Build in Australia
Posted: June 8th, 2018, 8:44 am
by Chase65
Awesome build! Looks good
Re: Explorer Build in Australia
Posted: June 26th, 2018, 3:16 am
by Nosam10
That looks awesome !!once l move back to
NSW from Tassie looking to start a jp build probably a Jeep
Re: Explorer Build in Australia
Posted: June 26th, 2018, 3:35 am
by Nosam10
That looks awesome !!once l move back to
NSW from Tassie looking to start a jp build probably a Jeep