My cheap Jurassic Jeep build
Re: My cheap Jurassic Jeep build
Okay Im going to give a run down of what I did how I did it etc. and cost.
COST 1300 for the Jeep and Plow
800 for jeep 500 plow
2 new fenders and windshield frame about 350
1 sheet metal for repair ebay 30
paint primer etc. 500
winch and mount ebay 350
light bar and lights used ebay 80
tires and rims craigslist 150
herculine floor 20
fog lights amazon 50
rear yellow lights ebay used 30
cb antenna ebay 50
speaker bar craigslist 30
lug nuts and various stainless bolts 80
1 new tire back to match ebay 140
resistors 5 ebay for cpu
exhaust 200
fix seal brake front axel 100
decals stickers ebay 60
grand total 3525
I could have probably saved some money by doing jeep 29 and if you minus 500 for the plow its 3025 not bad. I would add the 500 just for miscellaneous so thats why I left it.
COST 1300 for the Jeep and Plow
800 for jeep 500 plow
2 new fenders and windshield frame about 350
1 sheet metal for repair ebay 30
paint primer etc. 500
winch and mount ebay 350
light bar and lights used ebay 80
tires and rims craigslist 150
herculine floor 20
fog lights amazon 50
rear yellow lights ebay used 30
cb antenna ebay 50
speaker bar craigslist 30
lug nuts and various stainless bolts 80
1 new tire back to match ebay 140
resistors 5 ebay for cpu
exhaust 200
fix seal brake front axel 100
decals stickers ebay 60
grand total 3525
I could have probably saved some money by doing jeep 29 and if you minus 500 for the plow its 3025 not bad. I would add the 500 just for miscellaneous so thats why I left it.
Re: My cheap Jurassic Jeep build
Great Job for a small price ^^ For this price in France you could have only the accessories.
-
- Completed JP Jeep
- Posts: 63
- Joined: July 20th, 2015, 11:36 am
- Vehicle Make/Model: 1995 Jeep Wrangler Sahara
- Location: King George Virginia
- Facebook Name: Robert Lundin
- Contact:
Re: My cheap Jurassic Jeep build
Where did you find the new fenders so cheap?
I take it they are not used fenders?
I take it they are not used fenders?
- philosoraptor
- Posts: 43
- Joined: April 13th, 2016, 9:06 pm
- Location: Vancouver, BC, Canada
- Contact:
Re: My cheap Jurassic Jeep build
Nicely done! Your JP Jeep looks great. And neat breakdown of the costs, you must have found some good deals on parts, and consider yourself lucky you had a Jeep with half doors already, those cost at least $600+ for a decent set up here.
1994 YJ Sahara 4L/5sp - JP90 - Jurassic Trail Ready
viewtopic.php?f=20&t=5927
viewtopic.php?f=20&t=5927
- KytorIndustries
- Posts: 99
- Joined: November 13th, 2016, 6:58 pm
- Contact:
Re: My cheap Jurassic Jeep build
The fender I found one on ebay if I remember it as around 140 150 crown automotive and the other I found on craigslist old stock oem 100 bucks guy bought the wrong one needed a tj and had been sitting in his garage for while couldnt return it. I will say this the old stock fender as heavier and fit a little better but they both looked fine.
Re: My cheap Jurassic Jeep build
What brand and colors did you use for paint, and where did you buy it?
Complete Jurassic Park Decal kit ONLY $70 shipped! JP Raincoats, and more! http://www.JP.401Graphics.com
Satisfaction Guaranteed!
Satisfaction Guaranteed!
-
- Posts: 5
- Joined: February 21st, 2018, 6:18 am
- Contact:
Re: My cheap Jurassic Jeep build
Impressive build!
Re: My cheap Jurassic Jeep build
It turned out really nice despite of having a tight budget. Good job!
1992 Sahara with some jeep aftermarket parts such as a winch, lightbar and auxiliary lights.
Who is online
Users browsing this forum: No registered users and 41 guests