Kytor Industries JP17

Showcase your Jurassic Park vehicle, or build progress.

Re: Kytor Industries JP17

Postby KytorIndustries » September 10th, 2017, 8:45 pm

My neighbors must love me.

DSC_2117 Edited 2.jpg
Kytor Industries
kytor.com
User avatar
KytorIndustries
 
Posts: 94
Joined: November 13th, 2016, 6:58 pm

Re: Kytor Industries JP17

Postby KytorIndustries » October 29th, 2017, 11:41 am

DSC_2278.JPG
Kytor Industries
kytor.com
User avatar
KytorIndustries
 
Posts: 94
Joined: November 13th, 2016, 6:58 pm

Re: Kytor Industries JP17

Postby Chase65 » November 3rd, 2017, 12:35 am

Bet you had a fun halloween!
User avatar
Chase65
 
Posts: 64
Joined: August 13th, 2015, 8:33 pm
Location: Lubbock, TX

Re: Kytor Industries JP17

Postby KytorIndustries » August 11th, 2018, 9:54 am

Some updates on repairs/upgrades.

After having a rear brake line rot out, I replaced all of the lines and flex hoses with stainless steel; filled with dot4 and flushed/bled the system. Also replaced the rear brakes cylinders and hardware.
IMG_3958.JPG

IMG_3469.JPG


Added a cooler to the props:
IMG_4032.JPG


Replaced the bump stops with new:
IMG_3956.JPG


New plugs, distributor and plug wires, last time they were changed was 65 million years ago:
IMG_4329.JPG


New heavy-duty powder coated gas tank skid plate:
IMG_5836.JPG

IMG_5835.JPG


New steering stabilizer, the old one was a gigantic bitch to get out (tapered bolt), it went through some nice plastic deformation before finally popping loose, then cut it when an angle grinder to get it out:
IMG_6491.JPG

IMG_6589.JPG



I have a lot on my list downstream. Next up is to replace the old leaf springs and shocks with newer/better quality ones.
Kytor Industries
kytor.com
User avatar
KytorIndustries
 
Posts: 94
Joined: November 13th, 2016, 6:58 pm

Re: Kytor Industries JP17

Postby ratrace427 » August 11th, 2018, 3:26 pm

that is some hard but satisfying work. You have been busy.
Image
User avatar
ratrace427
Completed JP Jeep
 
Posts: 831
Joined: February 29th, 2012, 4:47 pm
Location: Tulsa, Ok

Re: Kytor Industries JP17

Postby JP Junkie » August 11th, 2018, 6:52 pm

Great work dude. Prolly too late, but if you're looking for a replacement fuel tank mat, I got mine from here for about $30:

https://www.detroitmuscletechnologies.c ... 90-rubber/
Jurassic Park Jeep: 1994 Sahara - WIP
https://www.facebook.com/JPMaintenanceJeep/
https://jurassicjeep10.wixsite.com/jurassic-jeep-10 (Slightly out of date)
Remember... a correct font is as important as the correct paint color!
Image
User avatar
JP Junkie
 
Posts: 145
Joined: January 4th, 2016, 12:29 am
Location: Minnesota

Re: Kytor Industries JP17

Postby KytorIndustries » August 12th, 2018, 7:37 am

JP Junkie wrote:Great work dude. Prolly too late, but if you're looking for a replacement fuel tank mat, I got mine from here for about $30:

https://www.detroitmuscletechnologies.c ... 90-rubber/


Thanks. I actually tossed the old mat and am running without one. Eventually I'll drop it again and put a new mat back in, but it's not going to hurt anything in the short term.
Kytor Industries
kytor.com
User avatar
KytorIndustries
 
Posts: 94
Joined: November 13th, 2016, 6:58 pm

Previous

Return to Vehicle Builds

Who is online

Users browsing this forum: No registered users and 4 guests