Page 15 of 19
Re: It was "In the making" but now "It's made"
Posted: June 28th, 2018, 10:22 pm
by JP Junkie
ratrace427 wrote:I noticed lots of little details missed on the new jeep builds
This is an understatement lol
It was
Posted: June 30th, 2018, 1:38 pm
by ratrace427
light bar apart, light tabs removed and spot putty added to the imperfection areas
//uploads.tapatalk-cdn.com/201806 ... a9dc48.jpg
Sent from my SM-G950U using Tapatalk
It was
Posted: June 30th, 2018, 3:10 pm
by ratrace427
radiant fire minus the flat clear
//uploads.tapatalk-cdn.com/201806 ... 00d761.jpg
Sent from my SM-G950U using Tapatalk
It was
Posted: June 30th, 2018, 6:08 pm
by ratrace427
RustyRodder wrote:Aw man, i really like the rustic look fo these Jeeps.
the rusty look is the only way to be different now.
Adding photos with tapatalk causes problems. If you open the image in a new tab then it pulls up the photo just fine. Is there a way to change the image size and fix the issue?
Re: It was "In the making" but now "It's made"
Posted: July 1st, 2018, 6:24 pm
by ratrace427
installed a new stainless spring for the whip. The chrome ones only last two years. Removed the seats for transport to the upholstery shop and sanded one side worth of fender flares.
Sucks that the inner fenders are rotten. They are falling apart in my hands but sourcing new ones will be a challenge. Ones from a salvage will most likely be just as brittle. maybe mother mopar has some available in her vintage parts warehouse.
Re: It was "In the making" but now "It's made"
Posted: July 16th, 2018, 7:23 pm
by ratrace427
Cleaning up nice. Vacuumed up the southern Missouri dust out of the carpet.
Re: It was "In the making" but now "It's made"
Posted: July 28th, 2018, 11:11 am
by ratrace427
interior finished and cleaned up the front bumper/winch. The flaking wheel paint is next on the list
It was "In the making" but now "It's made"
Posted: July 29th, 2018, 12:53 am
by Solace
Cleaning up just beautifully!
Re: It was "In the making" but now "It's made"
Posted: July 29th, 2018, 5:26 pm
by ratrace427
quick and easy door pocket fix. SEM flex coat dye
Re: It was "In the making" but now "It's made"
Posted: July 29th, 2018, 5:29 pm
by ratrace427
i masked off one and then used the same tape for the other three. Took about ten min to complete but maybe i should do another coat now that it has dried. This old nylon is really thirsty and it isnt quite as dark as the dye.
